Support Information for Satin Nickel 264 Contemporary Keypad Deadbolt (2024)

Home / Support / Electronic / 264 Contemporary Keypad Deadbolt

Documents

Note: Do not use prints from this website to mark distances. Due to individual printers, dimensions on installation instructions may not print at an accurate scale.

• Installation Guide - English

  6.2 MB

• Installation Guide - Spanish

  6.2 MB

Search Results For

• Answer Make sure your door is open and unlocked1. Enter your existing PC (Programming Code).2. Press "Kwikset" then "4" then "Kwikset"3. Enter a new PC. It must be between 4 and 10 digits.4. Press "Kwikset"For all programming sequences, success is indicated when the Kwikset button flashes green 2 times and you hear 2 beeps.If unsuccessful, the Kwikset button will flash red 3 times and you will hear 3 beeps.Note: If the lock is muted, you will not hear the lock beeping. Read More
• Answer A one-time user code may be used only once, and then it will be deleted immediately after use. Make sure your door is open and unlocked1. Enter your existing PC (Programming Code).2. Press "Kwikset" then "9" then "Kwikset"3. Enter a new User Code. It must be between 4 and 10 digits.4. Press "Kwikset"For all programming sequences, success is indicated when the Kwikset button flashes green 2 times and you hear 2 beeps.If unsuccessful, the Kwikset button will flash red 3 times and you will hear 3 beeps.Note: If the lock is muted, you will not hear the lock beepingIf User Codes are disabled (example: when you go on vacation), the lock can only be operated by the key and turnpiece until they are enabled again.Make sure your door is open and unlocked1. Enter your existing PC (Programming Code).2. Press "Kwikset" then "8" then "Kwikset"3. Repeat steps 1 and 2 to enable or disable the codes again.For all programming sequences, success is indicated when the Kwikset button flashes green 2 times and you hear 2 beeps.If unsuccessful, the Kwikset button will flash red 3 times and you will hear 3 beeps.Note: If the lock is muted, you will not hear the lock beeping Read More
• Answer Add User Codes: A total of 6 User Codes (and a temporary one-time User Code) may be programmed. Do not program a User Code that is the same as your PC (Programming Code).Make sure your door is open and unlocked1. Enter your Programming Code.2. Press ""Kwikset"" then ""1"" then ""Kwikset""3. Enter a new User Code. It must be between 4 and 10 digits.4. Press ""Kwikset""5. Test the code: While your door is open, lock it and enter your new User Code to make sure it unlocks the door.For all programming sequences, success is indicated when the Kwikset button flashes green 2 times and you hear 2 beeps.If unsuccessful, the Kwikset button will flash red 3 times and you will hear 3 beeps.Note: If the lock is muted, you will not hear the lock beeping.Delete User Codes:The lock is pre-programmed with a default User Code of 1-2-3-4. It is recommended that you delete this code.Make sure your door is open and unlocked1. Enter your existing PC.2. Press ""Kwikset"" then ""2"" then ""Kwikset""3. Enter the User Code you wish to delete.4. Press ""Kwikset""5. Test the code: While your door is open, lock it and enter the User Code to make sure it no longer unlocks the door.For all programming sequences, success is indicated when the Kwikset button flashes green 2 times and you hear 2 beeps.If unsuccessful, the Kwikset button will flash red 3 times and you will hear 3 beeps.Note: If the lock is muted, you will not hear the lock beeping. Read More
• Answer If all User Codes are deleted, the lock can only be operated by the key and turnpiece until a new User Code is added.Make sure your door is open and unlocked1. Enter your existing PC.2. Press “Kwikset” then “3” then “Kwikset”For all programming sequences, success is indicated when the Kwikset button flashes green 2 times and you hear 2 beeps.If unsuccessful, the Kwikset button will flash red 3 times and you will hear 3 beeps.Note: If the lock is muted, you will not hear the lock beeping Read More
• Answer Remove and reinstall the lock, making sure that the tailpiece is horizontal in steps 4 and 5 here. Read More
• Answer Enter your PC, then re-enter the door handing code: Press "Kwikset" then "0" then "Kwikset" Read More
• Answer The Auto-Lock feature automatically re-locks your door 30 seconds after unlocking. This feature is off by default.Make sure your door is open and unlocked1. Enter your existing Programming Code.2. Press "kwikset" "5" "kwikset"3. Repeat steps 1 and 2 to enable or disable Auto-Lock againFor all programming sequences, success is indicated when the Kwikset button flashes green 2 times and you hear 2 beeps.If unsuccessful, the Kwikset button will flash red 3 times and you will hear 3 beeps.Note: If the lock is muted, you will not hear the lock beeping. Read More
• Answer Make sure your door is open and unlockedYou can set the Auto-Lock time delay between 10 and 99 seconds.1. Enter your Programming Code.2. Press “Kwikset” then “6” then “Kwikset”3. Enter time between 10 and 99 seconds.4. Press “Kwikset”For all programming sequences, success is indicated when the Kwikset button flashes green 2 times and you hear 2 beeps.If unsuccessful, the Kwikset button will flash red 3 times and you will hear 3 beeps.Note: If the lock is muted, you will not hear the lock beeping. Read More
• Answer You can make guesses, but each three consecutive failed attempts will result in the 264 Deadbolt locking out for 60 seconds.If you forgot your user code, there are two options:1. Add new user codes.2. Reset 264 Deadbolt to factory settings to clear existing user codes and add new ones. Read More